Indoor heating-壁挂炉_燃气壁挂炉_小松鼠壁挂炉_壁挂炉十大品牌

50°C

35°C

60°C

Preset bathing temperature35°C

Heating temperature setting50°C

Confirm

Bathing temperature setting:35°C

Confirm

Indoor heating

Heating products

Home Heating Indoor heating

Wall-hung gas boiler heating

The heating of the wall-hung gas boiler is to mix and burn the natural gas and fresh air through the gas valve and the fan. Through a series of heat exchanges, after the heat energy is dissipated into the room by means of convection, radiation, etc., the indoor hot air exchanges heat with the low-temperature water in the wall-hung boiler, and so on and so forth to achieve the effect of heating. Wall-hung boiler heating can generally be divided into two types: surface-mounted radiator heating and floor heating.

Advantages of wall-hung gas boiler heating

Free control

Wall-hung boiler heating belongs to independent household heating, which can freely control heating time and heating temperature. Before the heating season, if the weather turns cold, you can turn on the wall-hung boiler in advance to enjoy the warmth; when going out, turn off the wall-hung boiler or reduce the power combustion to save energy and gas.

Environmentally friendly and economical

The thermal efficiency of ordinary gas-fired wall-hung boilers is generally above 90%, and the fully premixed condensing boiler can even reach 108%, with high energy utilization; and natural gas, as a clean energy, has less impact on the environment.

Comfortable

The wall-hung gas boiler uses convection and radiation for heating, which will not affect the indoor humidity. For humid areas, it is more conducive to the health of the family.

Wide range of applications

The wall-hung gas boiler can be installed in the kitchen, basement or balcony, connected to the radiator through the wiring of the room, and has the dual functions of heating and domestic hot water.

Air source heat pump heating

Air source heat pump is an energy-saving product that transfers heat energy from low temperature area to high temperature area. As the name suggests, an air source heat pump absorbs heat energy in the air, transfers heat from the outdoor air to the interior in winter, and transfers the heat from the interior to the outdoors in summer. Its cooling and heating principle follows the Carnot cycle. It consists of evaporator, compressor, condenser, throttle valve and other parts.

Energy saving

Under standard operating conditions, the COP value of most heat pumps can reach 3 (that is, input 1kw of electrical energy can generate 3kw of heat energy)

Environmentally friendly and safe

Heat pump consumes electricity and have no emissions.

Widely applicable

Available in most areas

Good stability

In areas where natural gas is unavailable and solar thermal energy is unstable, heat pump heating is the best choice.

Long service life

The design life of the core components of the air source heat pump can reach 15 years.